_

OUR STUDY AND EXAMINATION

OUR QUALITY CONTROL LABORATORY IS EQUIPPED WITH AUTOMATIC COMPUTERIZED MACHINES WHICH GIVE ACCURATE RESULTS. ALL THE EQUIPMENT HAVE THEIR SOFTWARE WHICH TRANSFORMS DATA INTO COMPUTERS AND PROVIDES COMPREHENSIVE RESULTS AND GRAPHS FOR ANALYSIS. ALL TESTS ARE CONDUCTED IN ACCORDANCE WITH VARIOUS IS CODES, ASTM CODES, BS CODES AND OTHER RELEVANT WE HAVE THE FACILITY TO TEST FOLLOWING MATERIALS.

93%

Quality Control

88%

Quality Assurance

Concrete, Cement, Flyash/Pozzolana, Aggregates, Bricks, Steel (Reinforcement & Structural), % elongation, Young’s Modulus, Yield Strength, Total Strength, Hardness, Bend, Rebend, GGBS (Ground Granulated Blast Furnace Slag), Lime, Tiles, Water, Bitumen, Plasticizer, Concrete Curing Compound, Aluminum Section, Bentonite, Timber/Wood, Ply board, Solid Block/Hollow Block/Paver Block, Special engineering, materials (on request of client), Mix Design, Grain size analysis, Hydrometer analysis, Atterberg’s Limit, Triaxial shear test (Digitriaxial), Unconfined compression test, Consolidation test (Digitalized), Permeability test (Constant and variable head), Standard and modified compaction test.

CBR Test– (Soak and Un-soak), Density, Moisture content, Specific gravity test, Shrinkage limits, Directshear test, Laboratory Vane Shear Test, Swell index and swell pressure tests, Chemical analysis of soil, Plate load test, pile load test, concrete core test, Uni-axial Compression Test, Modulus of Elasticity, Tensile Strength, Hardness, concrete (Fresh)- Density, Bleeding, Work-ability Test, Slump/Flow value, Compacting Factor, Concrete (Hardened)- Mix design (NS, HSC, HPC, DLC, HVFA), Comprehensive, strength, Tensile strength, Flexural strength, Cement content, Shrinkage & Moisture Movement, Cement- Fineness (By Sieving), Specific Surface (By Blaine’s Permeability Method), Consistency, Setting Time (Initial & Final), Soundness, Specific Gravity, Heat of Hydration, Drying Shrinkage, Comprehensive Strength, Tensile Strength, Flexural Strength, Chemical analysis.

Steel (Reinforcement & Structural)– Tensile Test (% Elongation, Yield Strength, Total Strength, Modulus of Elasticity), Band Test, Reband Test, Impact Test, Hardness Test, Brinell Hardness Test, Bonding Strength, Compression Test, Chemical Analysis, GGBS (Ground Granulated Blast Furnace Slag)– Specific Surface (By Blaine’s Permeability Method), Soundness, Setting Time (Initial & Final), Comprehensive Strength, Moisture Content, Chemical Analysis.

Lime– Fineness, Residue on Slaking, Comprehensive Strength, Soundness, Volume Yield of Quick Lime, Setting Time (Initial & Final), Free Moisture Content, Popping & Pitting, Work-ability Bumps, Transverse, strength, Chemical Analysis, Bitumen- Specific gravity, Flash Point, Fire Point, Softening point, Penetration test, Ductility, Loss on heating by thin film oven, Viscosity (Kinametic & Absolute), Water Content by Dean & Stark apparatus, Matter soluble in trichloroethylene, Concrete Curing Compound- Reflectance Test, Drying time, Water retention test, Bentonite- Swell index, Marsh cone viscosity, Slurry density, Liquid limit, Sand content, Moisture content, Fineness, Chemical analysis, Timber / Wood- Timer, Moisture content, Specific gravity, Compression test, Tension test, Nail & Screw holding test, Impact test, Torsion test, Ply Board- Glue shear strength, Fire resistance, Adhesion test, Water resistance, Moisture absorption, Mix design- Mix design of concrete, Mix design of dry lean concrete, Mix design of PQC, Mix design for wet mix macadam, Mix design for granular sub base, Asphalt concrete mix design by Marshall stability method.

We provide complete range of Non-destructive Testing (NDT) for all types of structures with all new sophisticated machines having microprocessor controller and computerized models which gives the most accurate data in best representable manner. IDAX has the following NDT facilities available

  • Digital Concrete Rebound Hammer
  • Corrosion Analyser
  • Ultrasonic Pulse Velocity (UPV) Meter
  • Ultrasonic Testing (UT) & Radiography Testing (RT) for Metals & Welded Structures
  • Rebar/Profometer for Concrete Scanning
  • Concrete Core Cutting
  • Pile Integrity Testing (PIT)
  • Plate Load Testing
  • Pile Load Testing
_

Our Team

Our testing procedure different from other. We use latest techniques to give you the exact result.

Good Name

Managing Director

Good Name

Manager

Good Name

Accountant

Good Name

Designer

We Are Social